question

fgs-energie avatar image
fgs-energie asked

Can't use the battery

Hello everyone,

I have a Fronius + Multiplus connected to a grid.
The Fronius is connected to the AC input of the Multiplus and to the CCGX via EM24 + RJ485 to USB.

It worked without problems for a few months but now the system can not read the batteries as they remain charged at around 50V (also I have installed a SmartShunt and it keeps reading 99-100% SOC).

I tried changing the meter, the cable, the CCGX, I updated the firmware and re-installed the ESS assistant but with no effects on the system.

How can I manage to fix it?
Thanks

Mike

Fronius
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·
What batteries do you have?

Some screenshots may help to figure out the problem.

0 Likes 0 ·
Show more comments
1 Answer
Mike Dorsett avatar image
Mike Dorsett answered ·

what happens when you turn the grid off?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.