question

kit-walker avatar image
kit-walker asked

would like to see PV volts from VE.Can MPPT on VRM

quattro 10k

blue solar 100/85 mppt

color control

bmv-712 smart.


i'm unable to see PV volts on the VRM

all devices show on the vrm

VRM
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi Kit,

PV voltage is available in the Advanced section of VRM, enable the PV voltage widget.


10 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kit-walker avatar image kit-walker commented ·

@Guy Stewart (Victron Energy Staff)

thanks mate for your reply, as it turns out i have the PV V & A widget turned on and all it has in it is no data to display.

I have 3 bluesolar 100/85 chargers that a hooked together , this should'nt effect the data ?

thanks

kit walker

0 Likes 0 ·
Show more comments
nigelfxs avatar image
nigelfxs answered ·

The BlueSolar MPPT "PV Voltage" is available on the D Bus, so one can subscribe to these messages using the MQTT topic "N/Portal_ID/solarcharger/256/Pv/V" (where "Portal_ID" is replaced with your actual VRM Portal ID).

I can therefore plot PV Voltage from my BlueSolar MPPT 150/70 on my Home Automation system. It should therefore also be possible to add a Widget to the VRM Portal to show this data.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kit-walker avatar image kit-walker commented ·

@NigelFXS thanks for the info ,, i'll do some research on this and see how i go.. kit

0 Likes 0 ·