question

anhoume avatar image
anhoume asked

Temp sensor on multiplus

Hi!

I have run out of free temperature inputs on my cerbo. Now I realized that i haven't used the temp input on my multiplus.

Does the multiplus send the temperature over ve.bus even if the unit is off? (Off as in soft-off)

multiplus ve.bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@andre.holgersson@callisto.nu

[Edited] Yes the temperature from the multiplus is seen on the VRM

See here.

Not the same way the ones for the Cerbo are displayed. Sorry Friday brain...

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

anhoume avatar image anhoume commented ·
Hmm? That document states "yes" for multiplus and "Temperature on VRM"?


To clarify my question, If I connect a battery temp sensor to the multiplus and have shared temperature sense activated in the cerbo, will the cerbo still get temperature readings if the multiplus is in off-mode?
0 Likes 0 ·
Alexandra avatar image Alexandra ♦ anhoume commented ·

@andre.holgersson@callisto.nu

My apologies.

The answer I gave was not clear. The answer is yes it does send its information send to the VRM to a widget in the advanced page, not the same as the Cerbo sends to the dashboard.

If the inverter switch is off, data is not sent.

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic