This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Looking at the Pmax values, the SmartSolar is getting next to nothing from the panel. I'd check all the connections and make sure the panel is not covered in dirt from the road.
What is the Pmax of the panel?
Morning guys and thanks for taking the time to respond. I have checked the voltages at the MC4 connectors and they are consistent with the measured voltage at the controller and what the controller App displays.
It was working fine and one weekend camping the output seemed to stop?
The panels have been cleaned and there isn’t any obvious signs of damage or delamination on the panels?
It’s officially a mystery but I don’t want to buy a new panel until I’m sure I need one.
Thanks again.
Additional resources still need to be added for this topic
32 People are following this question.