question

campdaily avatar image
campdaily asked

Multiples Compact not enough be bus ports.

My Multiples only has two ve bus ports. I need to connect a CCGX, a DMC & a ve bus BMS. Any ideas how?

multiplus ve.bus
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

johanndo avatar image johanndo commented ·
Ve.Bus is a serial bus architecture, all wires are parallel. You can get a RJ45 splitter if you cannot daisy chain the bus through all devices.
0 Likes 0 ·
2 Answers
Kevin Windrem avatar image
Kevin Windrem answered ·

Loop from one to the next, to the next. If a device only has one port, put it at the end of the chain.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Just read the manual...

The DMC is connected to the VE.Bus BMS there is an extra VE:Bus port for that.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic