Good Day,
I installed my Smartsolar MPPT 75/15 in my Travel Trailer today and set up the Absorption, Float and Equalization for my Interstate 12V Deep Cycle Battery under user defined.
The Equalization as per battery specs is 2 hours, Controller = 1 hr max. Assume I cannot change anything here.
The Battery Specs say the following for Absorption; 15.6V Taper to 4% of 20hr Ah rating and hold for 2-3 hours. Besides the 15.6 entry how do I input the Taper Details?
I do not have anything connected to the load terminals, Currently it is set to Battery Life. Do I do anything with this setting?
Am I missing anything else?
Thanks,