What type of connector is the VE.Direct port? I need to make several dozen interface cables for direct connect to telemetry.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
What type of connector is the VE.Direct port? I need to make several dozen interface cables for direct connect to telemetry.
It is JST-PH
I went for a look too, curiosity eh.. http://beta.ivc.no/wiki/index.php/Victron_VE_Direct_DIY_Cable
That Wiki keeps referring to RS232. There is no RS232 around VE.Direct, it's 5V TTL for the MPPT's and 3.3V TTL for the BMV's.
I've had to put a number of people straight around here. They shove +-12V RS232 signals up their poor little BMV and wonder why it's protesting,
Besides the Voltage, TTL signals are inverted in comparison to RS232.
Found it. Two connectors per cable!
https://www.adafruit.com/product/3568?gclid=EAIaIQobChMI0rW8vvLX4QIVwR6GCh0sYAQ9EAQYBCABEgJpefD_BwE
7 People are following this question.