question

bryce davis avatar image
bryce davis asked

what do i need to change to add another battery to the system?

***I've rerun all cables and done new connections since these photos using 3mm2 cable. i will be replacing that with 6mm2 cable when it gets here and im adding 50amp fuses on both sides.***


i have 1x 100ah battery here one in the box and 2 on the way. i was wondering what i need to do and change to add the other batteries into the system. i have a 100/50 charge controller and im mounting it all in a water proof boxes



side note i've been unable to upload images so im using an imgur album to put up photos

https://imgur.com/a/jDrNMcL

batterysolar
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bryce davis avatar image bryce davis commented ·

also has anyone used a usb cable over usb utp? something like this it converts usb to rj45 then back to usp. my controller is 50m from my pc and i'm sick of having to be within 5m of it to use bluetooth on my phone.

0 Likes 0 ·
1555502878534.png (200.1 KiB)
1 Answer
wkirby avatar image
wkirby answered ·

When you add the extra batteries, and string them all together, make sure to connect the system positive and the system negative at opposite ends of the string, not at the same end.

Something like this:


Those USB over UTP adaptors are hit and miss. They might work, they might not.
Electromagnetic noise in the environment coupled with cable length affect their operation too.


1555597773735.png (124.3 KiB)
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

JohnC avatar image JohnC ♦ commented ·

A further refinement to that: http://www.smartgauge.co.uk/batt_con.html

Take care with the wire sizing around the batts too. For diy there's this too: https://community.victronenergy.com/questions/10063/wiring-unlimited-a-new-book.html


0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic