question

Steve avatar image
Steve asked

can my 75/15 charge controller take a flexi 200w solar panel

can i use a 200w flexi solar panel with my 75/15 charge controller,my present system is using a 100w with 4.0mm cable.i was hoping to buy a 200w and just change it over

modifications
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
JohnC avatar image
JohnC answered ·

Hi Steve. Pretty much the perfect W for a 75/15. Nicer if you could find one with a highish Voc, like over 40V. You could also add another (well-matched) one to your existing in series for good value. Would need to see the panel specs for a firm suggestion either way

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Steve avatar image Steve commented ·

thanks vey much.

0 Likes 0 ·
Steve avatar image Steve commented ·

just as cheap to buy the 200w and then no hassle with joining wires

0 Likes 0 ·

Related Resources

Experiments, Modifications and Adaptions. Mods (Modifications) can be made to Victron Software by the Community. Please use the modifications space for enthusiasts who want to push what is possible, without official Victron Support.