Hi,
I'm asking this question because i'm trying to understand the limitations of the system.
I'm using Lynx Smart Bms in combination with Lynx Distributors using 6x LiFePO4 Battery 25.6V/200Ah Smart for 3 sets of 48V in paralel for a total of 30KwH of storage (less then half a year old)
However i like to increase my storage to 60KwH. However this requires 6 sets. According to the manual u should not have more then 5 batteries or 5 sets of batteries in parallel.
Drawing power at a lower c rating is better for the batteries as well as requiring a lesser depth of discharge daily.
Is this a BMS limitation? A current limitation? Its in the manual of the battery and not mentioned in the BMS manual, so i'm a bit confused.
Would i have to switch to different batteries/bms to make this possible?