question

daniedp avatar image
daniedp asked

Multiplus and smart solar communication

Good day


I currently have a multiplus 12/1600/70 , I also have the ve smart dongle, to monitor the inverter remotely.I would like to connect a 100/20 amp smartsolar MPPT to it, to enable to also charge through solar.


Will the multiplus and MPPT communicate with each other via Bluetooth or do I need to set something up, as to ensure I am not overcharging my LifePO4 lithium battery?


Thank you

Multiplus-IIMPPT SmartSolar
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

You will need to get a gx device like the cerbo.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

daniedp avatar image daniedp commented ·
thank you for the response.


would that be the only way ?


i run a very simple system, the gx is a bit of an overkill on my small system

0 Likes 0 ·
nickdb avatar image nickdb ♦♦ daniedp commented ·
You could probably use a Pi but that's beyond my realm.
0 Likes 0 ·

Related Resources

MultiPlus-II Product page 

MultiPlus-II Manual

Multiplus-II GX Online Manual

MultiPlus-II 230V Datasheet 

VE.Bus Error codes

Additional resources still need to be added for this topic