My system is still in the planning and acquiring stage, but I have already purchased my battery bank, that consists of 4 x Polinovel V8000 Lifpo4 wall batteries, that have their own BMS system, but as the batteries are still in production now, I have the choice of BMS protocol to be loaded onto the batteries.
I plan to use 1 x Victron Quattro 48/15000 Inverter charger and 4 x Victron Smartsolar 150/100 48v MPPT's and Cerbo GX & GX Touch 50.
My question(s) are, do I have the manufacturer load their own BMS protocol onto the batteries, and if so is it then possioble to configure the Victron equipment above to communicate and intergrate with the batteries BMS system?
Or, is it possible to have Victrons own BMS protocol loaded onto the Polinovel batteries by the manufacturer, if this is an option, what protocol do I/or the manufacutrer follow or how do I/they acquire the correct protocol or is this protocol the Interlectual Property of Victron and protected by Victron?
Or, is it not necessary for the battery BMS to communicate with the Victron Inverter and that the Victron MPPT's will take care of the correct charge and discharge rates of the batteries?