question

Juraj Nikolov avatar image
Juraj Nikolov asked

SOC releay assistent

Hi,

I want to ask, is more detailed documentation available regarding assistants?

I have a network switch and would like to use a relay from GX to control switching depending on the SOC. If the SOC reached 10%, the relay would switch signal eg NC(or NO), using which I would send an impulse to the grid switch, which would disconnect the PV and connect the distribution grid. If the SOC was at 50%, the relay would switch NO (or NC) and send a signal to switch the grid, where it would disconnect me from the grid and connect to the PV.
I'm just missing the documentation so I don't screw something up :)
Basically it is no science… but the documentation is terrible...

Someone help me, please :))


I want to stay off grid as much and as long as possible, even if I have a stable and available distribution grid. I want to use the distribution grid as little as possible and practically only as a backup. From this case I don't use ESS . A little strange design :))


Or are there paid trainings for this? :))


Many thanks for help.

SOCoffgridAssistants
26 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marekp avatar image marekp commented ·
@Juraj Nikolov

You are right, it is a strange design.

Let see.

When you still getting power from PV but SOC gets below 10%, you want to disconnect PV and get all power from grid.

Why you want to waste power from PV?

0 Likes 0 ·
Show more comments
1 Answer
Trevor Bird avatar image
Trevor Bird answered ·

Hello @Juraj Nikolov . You could simply use the auto generator start function of the CerboGX to achieve those SOC switching points. The autostart function is perfect for this. A lot of documentation exists for generator autostart.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Juraj Nikolov avatar image Juraj Nikolov commented ·

Thanks for the direction, I'll give it a try

0 Likes 0 ·
Juraj Nikolov avatar image Juraj Nikolov commented ·

@Trevor Bird

This doesn't work for what I need, relays on this my AST doesn't work for my purpose... :(
So I have to find another way:
Ideal solution is if the inverter could turn off if the SOC reaches a certain level of % and turn on again if the SOC reaches the level of %

0 Likes 0 ·
marekp avatar image marekp Juraj Nikolov commented ·
@Juraj Nikolov

Try reading about settings of Virtual switch.

There is an option called "dedicated ignore AC input" and there is a setting called "Do not ignore AC input" and

"when state of charge lower than (...)" in (...) you enter the desired SOC.

Maybe this will work for you.

I did not use it myself.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

Victron Offgrid page

VEConfigure Assistants manual