Need some troubleshooting help.
12v system. I have 2 - 3k Multiplus in split phase. Going to 6 100ah batteries.
Multipluses are wired to lynx distributor with 200amp MEGA fuses.
Something happened at 11:00am today. Rig sitting in garage so no solar coming through system. Started getting warning emails from Cerbo that “devices not detected”. Our batteries started a slow discharge at this time. Has been a steady 8-12 amp draw on them all day. Using multimeter found that the master multiplus mega fuse was blown. Replaced the fuse. multiplus is viewable on the cerbo but we are still discharging. When we unplug from shore power the rig goes dead.
Any thoughts or direction we should go?
TIA!
