question

arjan avatar image
arjan asked

I just installed a multiplus 2 48/5000-70 with a 48v 280ah battery, cerbo gx and smartshunt. Nothing else connected. Via vrm portal the ac-1 out shows a load of 5 watts. Can this be set to 0 or is this noise / emc. Thank you very much for any comments

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Mike Dorsett avatar image
Mike Dorsett answered ·

This is due to stray currents in the ac current measuring circuit and can be safely ignored. I've never seen any way of setting this to zero.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.