I have a victron 24/3000 multiplus on my rv that is doing some weird stuff. I’m not that familiar with the system but here is what happened tonight…
It ran great today boondocking, powering a single AC unit for three hours before I came home and started the generator. I got into a lengthy conversation with some neighbors, and my daughter comes out and tells me there are lights flashing and things are beeping. At this point the generator had been running maybe 4 hours and the batteries (4 battle born) were topped off. So I reset my control system (iN·Command) and shut down the ACs (I had turned on all three to cool the trailer) so I was drawing less than 200W from the system…no problems. We wrap up for the night and I say it’s time to power down the generator, and we lose power completely, the multiplus didn’t kick over. I restart the genie, nothing…so I go back into the inverter, remove the GX control cable, turn it on (genie running) and it comes to life. I secure the generator, and lose power.
The inverter won’t switch on without the GX unplugged and the generator running, but when I power it down, it won’t switch over. What am I doing wrong?