question

Andre avatar image
Andre asked

need help: Multiplus 12/3000 120/16 230v does not turn on

I have a problem installing the multiplus, the whole unit does not turn on.

AC230V IN is connected the right order ground/line/neutral. When I turn the main switch to on, nothing happened. No LED goes on. I have measured the Voltage at the input terminal, it is 230V and line is connected to line and neutral is connected to neutral.

There is no battery connected.

I have double checked this....now I do not have any more idea what to do.

Any suggestions?

thanks

Andre


MultiPlus Quattro Inverter Charger
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image wkirby ♦♦ commented ·
What position is the MultiPlus switch set to?
0 Likes 0 ·
Show more comments
2 Answers
xxn5ac avatar image
xxn5ac answered ·

Do you have the unit connected to a Cerbo GX? I believe the default in the case is that it is controlled by the Cerbo so you will need to turn it on there (in the menu).

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Andre avatar image
Andre answered ·

No Cerbo CX ist connected. Only AC input, nothing else.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.