This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
When i power up my smartmppt 100/50 via the ve-direct input, it goes to abhigh current and back less. So it goes up and down about 5 times and then stabilizes on the actual solar energy. Does anyone know if this is normal or is there something wrong. I have 4 x 12V panels of 175Wp in series.
Mppt's will do regular scans/sweeps to determine the maximum power available. This is normal.
Oke, thanks for the reply
