question

Install all developer tools for the tool chain with opkg first.

Would you please give the detailed Packes as Iam new using opkg?

Thank you.

Ich nutze das large image in der Version

root@raspberrypi2:/usr/local/sbin# cat /opt/victronenergy/version
v2.90~14
Victron Energy
20220616130540

Den Sensor und die Werte kann ich mit einem python Skript auslesen.

#!/usr/bin/python3
import board
from busio import I2C
import adafruit_bme680

# Create library object using our Bus I2C port
i2c = I2C(board.SCL, board.SDA)
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c, debug=False)

# change this to match the location's pressure (hPa) at sea level
#bme680.sea_level_pressure = 1013.25

# You will usually have to add an offset to account for the temperature of
# the sensor. This is usually around 5 degrees but varies by use. Use a
# separate temperature sensor to calibrate this one.
#temperature_offset = -5
temperature_offset = 0

print("Temperature: %0.1f C" % (bme680.temperature + temperature_offset))
print("Gas: %d ohm" % bme680.gas)
print("Humidity: %0.1f %%" % bme680.relative_humidity)
print("Pressure: %0.3f hPa" % bme680.pressure)
print("Altitude = %0.2f meters" % bme680.altitude)


# Minimal example configuration with common sensors
#i2c:

#bme680_bsec:

#sensor:
# - platform: bme680_bsec
# temperature:
# name: "BME680 Temperature"
# pressure:
# name: "BME680 Pressure"
# humidity:
# name: "BME680 Humidity"
# iaq:
# name: "BME680 IAQ"
# co2_equivalent:
# name: "BME680 CO2 Equivalent"
# breath_voc_equivalent:
# name: "BME680 Breath VOC Equivalent"

#text_sensor:
# - platform: bme680_bsec
# iaq_accuracy:
# name: "BME680 IAQ Accuracy"
root@raspberrypi2:/usr/local/sbin#

Die Ausgabe würde ich gerne ins Venusos übernehmen.

es heißt das large image die Build tools enthält.

@Netrange

Oder was meinst du mit der Frage?

Danke sehr.