Hi community, I'm discovering my new installation, very satisfied up to today and, of course, I'm also experiencing disappointment which I would like to know if there are any workaround or not
1) my CerboGX went dead after powering it back up (plugging the power supply, 53V from my battery). Seems to be far not unusual by reading messages in this community forum. Apart having a second one ready to be plugged : do you have any suggestion how to avoid (reduce) the occurrence of such failure of the CerboGX product?
2) Before this occurs I was making tests to see the limit of the system and what I found made me doubtful about design of my installation, I explain
- With the grid, and without CerboGX my batteries are not any longer charged by my RS450!
- Without the grid and without CerboGX, my multiplus stop providing power (simply shut down) after 5 minutes!
Which means the CerboGx is a key component that make any victron installation really weak and, according my experience today, this piece of equipment doesn't seems to be designed strong enough to resist to power off / power on, or?
Thank you in advance for sharing your suggestions about the above described issues