question

numer0-6 avatar image
numer0-6 asked

Absorption and float LEDs flashing simultaneously on MPPT150/70, batterie not charging

Hi,

I'm setting up a SmartSolar MPPT150/100 to charge batteries with solar panels. Here is my configuration :

-2 arrays of 3 solar panels each (Voltec 385W, Voc = 43.3V each panel)
-2 packs of 12V batteries in series (so 2x 24V batteries)

I've got the Absorption and Float LEDs flashing simulatenously, and the batteries are not charging. I checked the manual and it indicates "Charger or panel over-voltage". I measured the voltage coming from the solar panels and it never exceeded 115V (which is less than the maximum PV voltage).

What could be the cause of this error ?

Thanks in advance.

MPPT ControllersSolar Panelsmart solar set-up help
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@Numer0_6

It is a Smart Solar so connect to it with Bluetooth and use victron connect.

It will tell you what is going on directly no codes.

6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

numer0-6 avatar image numer0-6 commented ·

Hi alexandra,

We did what you suggested and noticed the the MPPT was configured to feed 12V batteries, where it's been hooked to 24V packs. Reading the manual, I understood it was supposed to be auto-detected, but apparently it wasn't. Switching it to 24V apparently solved the problem !

Thanks for the answer, hope this can help others ;-)

0 Likes 0 ·
Show more comments
numer0-6 avatar image
numer0-6 answered ·

Connecting in bluetooth and switching from 12V to 24V batteries configuration solved the problem. It is not auto-detecting and needs to be set using the victron app.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual