This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I am going to order a QUATTRO 48/5000/70-100/100 .
Two quick questions, if I specify to the supplier I want:
"Quattro 48/5000/70-2x100 400Firmware, specifically the 2658 series"
Is this sufficient ordering detail to be definitive, so that a repeat order will be parallel compatible?
And secondly there is an "s" suffix option for this size Quattro, what extra or omitted function does this "s" denote?
Thank you
The S stands for Silent.
In this model the fan sits on top of the unit, this provides better cooling and is quieter. This is because the air is pulled through rather than being pushed in.
Fans are mounted on the top of the cabinet for a lower air speed. This improves cooling and there is less wear on the components. It also has a smarter fan control that, where possible reduces the fan rpm.
This was provided by @Margreet Leeftink (Victron Energy Staff)
Thank you
The wall hook remains the same? I.e. can a *-100 be replaced by a *100-S using the same wall mounting?
Hi @PetaJoule
You can find the enclosure dimensions on the product page:
https://www.victronenergy.com/inverters-chargers/quattro#enclosure-dimensions
the S version has a different mounting plate:
Update: I was wrong, as the 5k unit has only the small mounting plate (vs a big plate for 8k and higher)
https://www.victronenergy.com/upload/documents/MultiPlus-Quattro-Inverter-24V-48V-5000VA.PDF
https://www.victronenergy.com/upload/documents/Quattro-48V-5000VA-S.PDF
(it's a good thing BTW, as one can re-use the hook carrying the main load.)
But what's more important is, that in case of a "drop-in replacement", the 100-S will not simply take 6cm more headroom.
From the CAD drawings it looks like being on the same hook, it will extend 33mm down and 27mm up, although that information is missing in the drawings. Even that is a good thing, as the installation should have these tolerances.
Thanks for noticing, I've updated my answer.
does anyone knows if the 48/5000/70-100s is still up to date hw rev?
i have new S models installed at customer. Hw rev is 01
what is the latest hw rev on the standard 48/5000/70-100?
