This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hey need help, Anyone knows how to connect genset deawoo ( https://daewoo-power.com/multicatalog/item/daewoo_ddae_9000dxe-3/) to input 2 in quattro II system ( 3 fase).
Do i need specific 5 pin cable to ATS and connect to cerbo gx for start/ stop comunication ??
can anyone help ?
anyone ? anyone ?
Sharing my experience, connecting a single phase Kipor generator together with its ATS. The power output of the generator is connected to Ac-IN1 of the Quattro. The power monitoring for the ATS is done based on the Quattro AC-Out2, but via a relay which is controlled by the GX device. So, when the criteria is reached by the GX device (no grid and batteries SoC lower than x%, or the monthly maintenance running), the GX device via one of the on-board relays is controlling another relay which can handle 240V output and cuts the power to the ATS input...and at that moment the ATS thinks that the grid is off, and starts the generator. I hope I've managed to explain the how-to. Unfortunately I don;t have a scheme to share, but I think you got the point.
