Hello,
i like to connect a Cegasa CAN BMS to the Cerbo BMS CAN Port (CAT5 straight, terminator plugged in), but it wont be recognised an doesn't show up as a Battery Monitor.
The Cerbo has the most recent FW version from the release feed installed which is v2.89. The troubleshoot section of https://www.victronenergy.com/live/battery_compatibility:cegasa states, a firmware version v2.90 or later is to be used. Is it advised to install a v2.90~ from the release candidate feed?
Thank you!
best regards
Helmut