This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello. I have a 3-phase network at home. If I wanted to connect all phases to one quatro 15kW, how would it be combined? In the event of a quatra failure, the sleeping phase would be disconnected to the three-phase network. I do not use any three-phase equipment in the house. One powerful phase is enough for me.
I think you need to help us here to give a hint on why you want to do this.
I can not think of any benefit for doing this.
Best regards, Rob
it is easier to dimension and connect appliances in a single-phase system. if I have 3 phases, I have to think about where to connect cooking, heating, car charging. this is how I connect everything to one phase. I take back the possibility of switching everything to 3 phases. I want to convert the try phase into a large one via a victron 15kW. and it would run from the battery. If there was not enough solar energy, the three-phase would charge the battery. I am speculating if it is not a good solution to have one phase for everything.
