question

john79horton avatar image
john79horton asked

Set two different input current limits (multiplus II)

Hi am about to replace my outback power system with victron was hoping to us a Multiplus-II, I have a Geni 8kw and also some grid power 2kw I was hoping to install a charge overswitch onto the input of the Multiplus - II to switch between the grid and geni. but i need to change the input current limit each time i change the switch over. is there away around this without buying the Quattro-II

Multiplus-IIinput current
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

there is no standard way, to do this

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MultiPlus-II Product page 

MultiPlus-II Manual

Multiplus-II GX Online Manual

MultiPlus-II 230V Datasheet 

VE.Bus Error codes

Additional resources still need to be added for this topic