question

ejrossouw avatar image
ejrossouw asked

Does the Victron EV charging station offer beter system integration with a Victron system than a Zappi?

@Lucian Popescu (Victron Energy Staff)

A customer has a challenge in that his Zappi starts charging when his Quattro exports which is fine. However, when export stops, the zappi continues to charge and drains the ESS batteries.

Objective: 1. Have automated charging of the EV using ONLY excess PV during the day, but without constantly swithing on/off when excess PV is very little or fluctuating. 2. Set scheduled charging to charge from off-peak rates.

1. Will a Victron charging station overcome this Zappi problem being integrated with the rest of the Victron system?

2. Can scheduled charging be set in automatic mode?

ev charging stationess dischargingzappi
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Lucian Popescu (Victron Energy Staff) avatar image
Lucian Popescu (Victron Energy Staff) answered ·

Hi, I don't know Zappi products but I can tell you how our product is working. If the production is higher than the minimum necessary power for charging EV (that's usually 6A) it will start charging in 30 sec. If it's lower will stop after 30 sec Do you need something else?

9 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ejrossouw avatar image ejrossouw commented ·
Thank you for the prompt reply. Can a charging schedule be set in automatic mode for charging e.g. in the evening at off-peak rates?
0 Likes 0 ·
Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ ejrossouw commented ·

not yet, it is on the to do list to have scheduled charging but not for automatic mode. Automatic mode is designed to use only the excess power, so off-peak rates are not important when using only energy from PV


0 Likes 0 ·
Show more comments
bm97ppc avatar image
bm97ppc answered ·

There are things you can do to fix this, I have a Zappi and have noticed this but never really looked into it. I just did a quick google and there are various fixes, e.g. set an export margin in the Zappi or add an additional CT to the Zappi for the battery. Myeneryi support is very good and they have a good community with lots of info and experts.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.