I have a BMV-712 that is sharing battery voltage and battery temperature with a Smart Solar MPPT 75/15 via VE.Smart networking. I've recently noticed that the temperature as displayed in the VictronConnect iOS app is different units depending on the device I choose in the app's device list. For example, when the BMV is selected, the temp units are set to Fahrenheit and that is what I see on the status page. If I select the MPPT device, the temperature is displayed in Celsius on the status page. I don't see a way to configure units on the MPPT side and since it is a value shared from the BMV it probably shouldn't be necessary to do that anyway. I don't recall this issue in the past, not sure if it happened because of an app update or firmware update. Can someone assist?