This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
All,
I'm really pleased with the Comworks SuperSense tank level sensors. They fit perfectly into the Cerbo installation of my camper van.
Also the Ruuvi Tags do.
Now I'm wondering if one could also integrate the Comworks SuperSense TireCheck (TPMS) sensors, which are bluetooth devices like the Ruuvis.
Cheers,
luphi
As mentioned in this thread where support for BLE Gas Tank & Water level sensors from http://mopeka.com/products/ will landing soon the devices need to support unencrypted bluetooth advertising, so that would be the first step in determining if Comworks SuperSense TireCheck (TPMS) sensors could be supported…
I’ve been looking into this subject myself, I started this thread a while ago, not much details there, but its of interest to me.
I in fact just a couple of hours ago I purchased these BLE 5.0 TPMS sensors from Aliexpress based on this open source project as if these can be supported I’m expecting these devices are advertising unencrypted Bluetooth advertisements, fingers crossed they do.
I’ll give these a test, and hopefully can integrate them into Home Assistant via ESPHome or similar, if that works the next step will be to see if they can nitrate with Victron Venus’.
I wish BLE TPMS sensors too to be available on the CERBO. As @netweb I'm too running OpenMQTTGateway but with having a more tight integration.
