Hi,
i set up my Batterie to 200ah but the bar on the screen is at 100ah empty.
How can this be?
lg Stefan
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
i set up my Batterie to 200ah but the bar on the screen is at 100ah empty.
How can this be?
lg Stefan
I have experienced the same recently with a new BMV712. SOC is showing 95% but when change display to voltage the battery symbol showing faulty just one bar as it is just 25% (I have never seen this issue before..)
This has been changed in the latest firmware. A good change! The battery indicator refers now to the configured discharge limit. So if that is set to 50% everything is correct! The "correct" value is shown at the percentage SOC screen.
I believe discharge limit is the alarm setting (#33), so if you set 50% and only 100 of 200 Ah, then the battery symbol showing empty (no bars) but SOC 50%. In the case below, alarm is set at 20% because Lithium. Unit shipped from Victron in Feb 2019 and latest firmware. It seems more of a problem for the new firmware..?
8 People are following this question.