Looking for help to fix a mismatch between our Victron BMV-712 Smart Battery Monitor and the actual voltage of the batteries. We have four Relion RB100-LT batteries. Example:
- Victron BMV-712 = 11.57v
- Voltage of the Batteries = 13.7v
What I have done so far:
- Made sure that the Victron settings match the settings provided by Relion for the RB100-LT batteries.
- Have read the Victron manual and watched numerous YouTube videos. Tried to do a “Zero Current Calibration”. But, no luck.
- Also reset all Victron settings to factory default and then once again updated the settings to the RB100-LT recommendations.
No success so far. Please advise. Thanks!!