Hello ,
My system reset in the morning with " VE.Bus Error 3: Not all, or more than, the expected devices were found in the system on VE.Bus System"
along with " VE.Bus Error 10: System time synchronisation problem occurred "
How do I get to the root cause of the issue .
The only special conditions I might think of was there was no grid and there is a second smaller 800 VA multi working in ESS mode on the AC out1 of the 5 x 3 Quattro configuration
Could The LOM 2 detection in 800 VA multi trigger this ? If yes .
I will move the 800 VA on ACout 2 so it works only in presence of grid and gets islanded when grid is absent