I'm replacing my almost-failed AGM batteries with PylonTech.
What is 'best' or 'accepted' practice to connect the venus (power) to the batteries? There is a diagram i found which shows the gx powered off the Multiplus battery terminals. Presumably somehow terminating the power leads with 8mm lugs. sticking the bare wire under the nut doesn't seem right...
The gx has a fuse in line, but i'll also include a switch.
Is that best, or should i power it off either the 'output' side of the battery main breaker, or the 'input' side of the main breaker. In which case, i'd have to also provide a negative bus connection point as well.