This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
As per title , this happens at least once a week from what I can tell.
This morning , it has just jumped from 73% to 100% , solar PV only just started kicking in , system voltage is way below still at 53.80 volts , absorbtion is set for 55.70 on MPPT controllers and in Multiplus is set to assume 95% SOC at 55.70 volts.
Any ideas?
I have just downloaded the data in excel where it confirms this as well.
Please see attached screenshots
Are you using "2 signal BMS" assistant or ESS with this settings set in it?
@mvader or other Victron Gurus , would you mind looking at this to see what might be causing the issue?
You won’t get any official help for batteries that aren’t on the compatible list.
Having lithium batteries without a bms or a properly setup shunt will just cause issues.
There are tons of topics here you can search for with all the information you need.
Its not a glitch, you just haven’t set it up right.
Why are you complaining? You clearly don't care about actual battery SoC since you're using one that can't count the incoming current from the PV.
Contact your reseller for support.
