question

valentinschmid avatar image
valentinschmid asked

CCGX Genset auto Start/Stop

Hello,

we just figured out, that it is impossible to interrupt the auto start of the CCGX. If the autostart is enabled, we can only stop the genset by the Fischer Panda genereator panel. When stopping by FP-panel, the autostart function of FP is automatically disabled and must be switched off an on again to enable the autostart function.

It would be very helpful to have an option to stop the genset by the CCGX while it runs due to the autostart.

CCGX Color ControlGenerator
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
alan avatar image
alan answered ·

Hi,


It's possible to stop the genset from either the Genset page.

1656574218027.png


It will say stop in the red box if running, press center button (twice from memory)


Or in the genset start/stop settings area

1656574416025.png


1656574218027.png (51.6 KiB)
1656574416025.png (20.7 KiB)
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

harold avatar image harold commented ·

Not when it is started automatically due to a 'condition' !

because the condition will stay

1 Like 1 ·
Trevor Bird avatar image Trevor Bird harold commented ·
Hello @Harold , But if you were in the menu of the CerboGx couldn't you just disable the auto genstart function for the period you wanted manual control??
0 Likes 0 ·
Show more comments
touteslesbatteries avatar image
touteslesbatteries answered ·

Hi, maybe you can use relay auto12v/40ah COBO

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.