question

lambertkleinjans avatar image
lambertkleinjans asked

MPPT 100/20 very low voltage

My MPPT 100/20 suddenly only sees less than 1v on the battery. I’ve checked all connections. The wires into the MPPT when disconnected show a normal 12.2v, but once I connect this up the screws in the MPPT show a voltage of about 0.74V. The fuse is fine, the firmware is up to date. So not sure what to do here. Any ideas?

c4e0a047-d4c4-4a29-a0b7-bd28313f506c.png

MPPT Controllersbattery charging
71dd5be8-d40d-4efc-a729-7c83f9b56f1c.png (400.1 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

seb71 avatar image seb71 commented ·

The wires into the MPPT when disconnected show a normal 12.2v, but once I connect this up the screws in the MPPT show a voltage of about 0.74V.

0.74V is shown by MPPT (in VictronConnect) or is measured by you with a multimeter on MPPT battery terminals? Or both?

0 Likes 0 ·
Show more comments
0 Answers