Hello, I would like to build an 16S 48V LiFePO4 battery pack with 280Ah EVE cells and 200A Daly BMS with CAN-Port. As inverter I decided for an MultiPlus-II 48/3000/35-32 GX. I asked the Daly support if the BMS will communicate with the Victron MultiPlus-II GX and they confirmed. In an other thread sombode wrote that the Daly BMS will not communicte by CAN-Bus with the Victron Multiplus II GX. Does anybody has experience with the Daly BMS and if it works by CAN-Connetion out of the box with the Victron devices?