This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I want to Connect an external Switch to my multiplus I 3000 . In the Manual it says this is possible through H terminal, leaving the outside Switch on multiplus in on position. Connect left and Middle for "on" Connect right and Middle for "charge only". What connection should be made for off, it doesn't say this in manual.
Ok thank you I am confused because the Manual says to leave the outside Switch on the multiplus in on position.
On page 51 you can see the different connections:
H is the spot on the multi where you can install a remote switch.
I know I need to Wire it to H terminal but how to Wire it to the on off on switch? It only talks about wiring for on position or Charger only position in the Manual.
