question

sean avatar image
sean asked

Feature request: MPPT (with display)

Under ESS, can the MPPTs display something useful please - such as watts, amps etc ?

Scrolling watts/amps/volts would be very informative.

Anything other than just ...


MPPT Controllers
20190406-1720590.jpg (1.4 MiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mark avatar image Mark ♦♦ commented ·

I agree - I have DVCC active & my SmartSolar MPPT always states 'REMOTE' on the display. Even if I scroll through the display options it comes back shortly after.

For me I see this as a nuisance and waste of my expensive optional display.

Before I enabled DVCC I had the display showing voltage & charge amps that was very useful info to have available.

0 Likes 0 ·
2 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

And, this came in right in time. Fixed! See:

https://community.victronenergy.com/articles/17669/mppt-firmware-version-v141-released.html


Thanks @Sean; its indeed much better now.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sean avatar image sean commented ·

Thank you, an unexpected bonus is tail current (soon)

0 Likes 0 ·
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hey all, noted; and we’ll look into it. Thanks for raising this. Matthijs

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sean avatar image sean commented ·

Thank you.

0 Likes 0 ·
Mark avatar image Mark ♦♦ commented ·

Thank you from me as well!

0 Likes 0 ·