Hello,
I am using the same system for a couple of years on my boat. I have 3 x MPPTs (2 x 100/30 and 100/50) for different arrays of solar panels. All are directly connected to a large battery pack at 24V.
Here are couple of problems raised after the firmware upgrade to v1.59.
1) The MPPTs are lost from the Victron network; I can not see them via web portal, VRM, and GX.
2) It looks like all MPPTs can see each other via VE.Smart. (My system used to work with VE.Bus as far as I know). I can connect to these devices via Bluetooth and my iPhone victron app and I can see the network is established
3) The voltage coming to my big MPPT (100/50) from PV array is about 70 volts as it should be. But once it is connected to MPPT, it drops to 28-30 volts and stops charging. (My battery system is 24V and normally they are at about 27-28 volts charged)
Furthermore, my Control GX shows such error screen on VE.CAN port. Maybe this helps.
I can provide more information. Any idea is much appreciated. Also, hints about how I can downgrade to an older firmware are appreciated.
Thanks. Serkan
