Hello
1. Question
I have Mutliplus 24/3000/70-50 in (Easysolar) with Lifepo4 battery, I updated the firmware to 2610497, with this firmware is possible to control the inverter by SoC of battery, I set SoC low shut-down to 20% and restart to 25%, the inverter always turns off on 20%, but randomly restart, sometime on 25%, but sometimes at 30%, one at 78% ect.
2. Question
I have another installation with Mutliplus 48/3000/70-50 fw: 2620497, But this has another issue, after reconfiguration or if I manually turn off the inverter, the inverter does not start immediately, but after several minutes(10min or more), for instant restart, I have to switch to charger mode for few seconds and then quickly switch to ON.