question

agehring avatar image
agehring asked

Multiplus-II 12v 2x120 overloading with nothing connected

I'm working on installing a M-II 2x120, and when I turn it on it immediately goes into overload mode (red light), which is odd since the other end of the 6/3 isn't connected to anything yet.

Removing the wires from the connection on the Multiplus-II allows it to work, and I've verified that the wires are not shorted together.

Any Ideas what may be going on?

ac coupling
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@agehring

Common mistake is mixed neutrals

0 Likes 0 ·
agehring avatar image agehring Alexandra ♦ commented ·
Mixed with what? As noted, the wires are free on the other end.

Black -> L1

Red -> L2

White -> N

Ground -> PE (Earth)

0 Likes 0 ·
Alexandra avatar image Alexandra ♦ agehring commented ·

Ah, so only in the by free just free to air? Weird one. No fly aways? Are they in one conduit?

Is there correct output with only battery connected?

0 Likes 0 ·
Show more comments
0 Answers

Related Resources

AC-coupling and the Factor 1.0 rule


AC-coupled PV with Fronius PV Inverters



Additional resources still need to be added for this topic