question

remyjohnsen avatar image
remyjohnsen asked

Controlling a SSR-40 relay with venus or the smartsolar 150/85

I have a system with a smartsolar 150/85 and a venus witch i can check via internet.

What im trying to do is to connect a relay to the rely port on the venus and then be able to control it via remote consol.

I can not find a wiring diagram for how to connect to the relay 1 and 2 on the venus. Is there someone who can share some light on how to do this?

Venus GX - VGX
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Ole Saether avatar image
Ole Saether answered ·

Please see the picture under Overview of connections on this page:

https://www.victronenergy.com/live/venus-gx:start

Each relay has three connections: NO (Normally Open), NC (Normally Closed) and common. If you want to turn on a relay you connect the coil of the relay to the NO and common pins of one of the Venus GX relays.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

russ avatar image
russ answered ·

'that page does not exist'

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Ole Saether avatar image Ole Saether commented ·

Strange. The link is correct. Try typing it in in the address field of your browser.

0 Likes 0 ·