question

skabalavayi avatar image
skabalavayi asked

Bluesolar MPPT 150/60 rev2 (0XA070) data

Hello,


We have Bluesolar MPPT 150/60 in our system. When I read this device, I get abnormal messages after Checksum. I am attaching my data information below. It would be great if you could help us understand these messages or how to deal with them. Thanks in advance. bluesolar-150-60-02.png

MPPT Controllers
bluesolar-150-60-02.png (12.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi,

These messages are so called VE.Direct HEX messages. They are described in our VE.Direct documentation that can be found here: https://www.victronenergy.com/support-and-downloads/technical-information

Kind regards,

Thiemo van Engelen

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

skabalavayi avatar image skabalavayi commented ·

smartsolar-mppt-75-15.pngThank you for your reply.


In our system, we have one SmartSolar MPPT 75/15 and BlueSolar MPPT 150/60 rev2. smart solar is giving data as per the protocol but not BlueSolar. In Bluesolar I am getting abnormal messages after checksum which are not explained in the document. Here I am attaching images of both MPPTs.bluesolar-150-60-02.png I need help to deal with those messages from Bluesolar. Your ideas will be appreciated. Thanks in advance.

0 Likes 0 ·
bluesolar-150-60-02.png (12.9 KiB)
smartsolar-mppt-75-15.png (9.0 KiB)
Show more comments