Will these settings work for 250/100? I want the mppt to output constant 50 volt and maximum variable current (based on solar harvest conditions), up to max current.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Will these settings work for 250/100? I want the mppt to output constant 50 volt and maximum variable current (based on solar harvest conditions), up to max current.
In theory yes. But if your battery level is low, then the Voltage will be lower than 50V until the charge level comes up.
Will the charge current change if I change the fixed voltage from 50 to e.g 20v?
Additional resources still need to be added for this topic
25 People are following this question.