I have a SmartShunt connected to 6 lead-acid 6v batteries in a 2s3p config. SmartShunt with updated firmware, installed in April 2022, SmartShunt shows SOC in VictronConnect on iOS via Bluetooth. Added a CerboGX in May 2022 with current firmware. CerboGX does NOT show SOC. When I looked at the network config of the SmartShunt in VictronConnect it shows it is sending voltage and current data but that's all. I assume it needs to show that it's sending SOC or the CerboGX won't be able to display SOC. How do I add SOC to the data the SmartShunt is sending over VE.direct. I also have a Victron SmartSolar MPPT 100|20 connected via VE.direct and I'm getting what I want from it. Since adding the CerboGX I've only discharged to 98% and back up to 100%, I don't think I need a full cycle since I can already see SOC value in VictronConnect app so obviously the SmartShunt has figured out SOC.