Hello!
I have some experience with Victron equipment, but from time to time, I get stuck.
The plan is to connect seven Victron SmartShunt to a CerboGX and monitor them via the Victron GX Touch 70.
I have put together a quick drawing of the setup, with cables, lengths, and equipment, but I'm curious if it will work at all.
Three of the seven SmartShunts can be directly hooked up to the CerboGX with VE.Direct cables, but the other four are too far away and I also lack VE.Direct connections on the Cerbo.
I've read that you can use the VE.Direct to USB Interface cable to a USB-Hub which is connected to the CerboGX, but the distance is 10 meters from the CerboGX to the hub, and then 2-3 meters from the USB-hub to the SmartShunts (USB Extenders -> VE.Direct to USB Interface).
Will this even work, or will I have trouble powering this? Unsure if the picture resolution is high enough.
Appreciate all feedback and help!