question

duswami avatar image
duswami asked

Should i use Multiplus2 temp sensor or SmartShunt temp sensor?

The multiplus 2 comes with a temperature sensor for the battery. I have the smart shut which also allows for a temperature sensor. These seem redundant which one should I should I use?.

Multiplus-IISmartShuntTemperature Sensor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
marekp avatar image
marekp answered ·

@Duswami

MP-II temp sensor is useless for the LFP batteries.

I think is useful only for Lead batteries.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

duswami avatar image duswami commented ·
Using AGM, so, which one should I use?
0 Likes 0 ·
marekp avatar image marekp duswami commented ·

@Duswami

For AGMs the one that comes with MP-II is fully functional and I would use this one.

The one for SmartShunt is different and you have to pay for it extra.

0 Likes 0 ·
Show more comments
Sarah avatar image
Sarah answered ·

MPlus temperature is fine for AGM batteries but if you have other devices (ie. MPPT chargers) you want want to use the smart shunt temp sensor or both. Having a Cerbo GX in the picture can also change the way you do things.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.