This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Got it all installed, but the node red integration seems to have issues working with the multiplus/system stats, the few post i can find on it seems to be people walking away from the victron node red integration and going to the modbus api. Wondering if anyone has had better luck.
Short of it, any of the nodes that would allow pulling from the multiplus don't detect it. (Ac Load for example). DC Load also won't detect. But Solar is fine.... On 2.90-10.
Do you have an Energy Meter connected to AC out and did you assign it the role for AC loads?
If you hover over the AC load node, there is some info popping up, telling what are the requirements to read from that node.
I dont think I do, same issue for DC Load, i see it all in the UI on the cerbo, so confused that i would need to assign anything for it to work in nodered. (i dont have anything show up on the selector as option for load in nodered)
