Have a VE Direct to NMEA 2000 converter connected to a BMV702 and the NMEA2000 network and I can see the battery voltage and Amps on the NMEA2000 network all is well
Now we have installed a CCGX Fw2.23 and connected the BMV702 via the VE direct port to the CCGX and the correct battery details apear.
Now comes the issue
I then plug the VE direct to NMEA 2000 converter into the CCGX and no data is seen on the NMEA 2000 network
on the CCGX the VE direct to NMEA2000 unit is not seen in the device list
I have tied a secound ve direct to nmea2000 unit just in case I have a faulty one still the same
The targeted result is to see volts and amps on the NMEA 2000 network
has anyone got any suggestions